Debate: Lorentz invariance of certain zero angles

Discussion in 'Formal debates' started by Pete, Nov 25, 2011.

Thread Status:
Not open for further replies.
  1. Pete It's not rocket surgery Registered Senior Member

    Messages:
    10,167
    Updated tracking list

    1.0 Scenario (Complete)
    1.1 - Coordinate dependence vs. coordinate independence (Resolved)
    1.2 - Definition of rods T1 and T2 (Resolved)
    1.3 - Definition of points A and B (Obsolete)​

    2.0 Methodology (Complete)
    2.1 - Tach's proposed measurements (Complete)
    2.1.1 - Transverse doppler effect (Complete)
    2.2 - Pete's proposed measurements (Complete)
    2.3 - Measuring remote events using background Rods and Clocks (Complete)

    3.0 Calculations (Active)
    3.1 Calculations for Pete's method (Active)
    3.1.1 Lorentz transformation of vectors (Active)
    3.1.2 Orientation of rod T1 (Pending)
    3.1.3 Angle between surface and velocity in the low velocity limit (Galilean spacetime) (Pending)
    3.1.3.1 Rindler's proof of angle invariance (Pending)
    3.2 Calculations for Tach's method (Pending)

    4. Summary and reflection (not started)​
     
  2. Google AdSense Guest Advertisement



    to hide all adverts.
  3. Tach Banned Banned

    Messages:
    5,265
    See C. Moller "The Theory of Relativity". pages 41 and 47.

    Yes, more generally, it is \(\hat{P_t}(t)\)


    No, see Moller, page 47.

    Since I just answered your challenge to my writeup, I would like you to answer my challenge in the previous post. Thank you.
     
    Last edited: Jan 27, 2012
  4. Google AdSense Guest Advertisement



    to hide all adverts.
  5. Pete It's not rocket surgery Registered Senior Member

    Messages:
    10,167
    3.1.1 Lorentz transformation of vectors

    Which edition? The 1952 edition is freely available online. My university has the 1974 edition at another campus, so it will take a few days to get. I don't have reasonable access to the 2011 edition. Google books has snippets of others.
    Can you please explain the context of the equation?
    What does dt represent?

    Thanks. It would be useful if you could stick to notation we've used previously, or at least explain any new notation you decide to use.

    Now, we agreed that a displacement 3-vector is transformed according to what you wrote on page 2:
    So why are you transforming \(\hat{P_t}(t)\) according to the Moller equation?
    They are not equivalent.

    Or, you could just explain your understanding directly.
    Do you understand the equation you used?

    Yes, that will be done, but we must proceed one issue at a time.
     
    Last edited: Jan 28, 2012
  6. Google AdSense Guest Advertisement



    to hide all adverts.
  7. Tach Banned Banned

    Messages:
    5,265
    1952 is good.

    Because different approaches show the SAME result. This is important in establishing validity.

    Please look at the web document, I inserted all the explanations necessary (the equations stayed the same).



    Don't patronize me. You took 5 weeks to write up an incorrect solution, I don't need your patronizing tone.


    No, please answer my question, I raised the issue with your solution, according to the rules you should answer it in the very next post, so please address it. Did you check the Rindler reference I gave you?
     
    Last edited: Jan 28, 2012
  8. Pete It's not rocket surgery Registered Senior Member

    Messages:
    10,167
    3.1.1 Lorentz transformation of vectors
    Can you please explain the context of the equation?
    What does dt represent?
    This is the correct transformation for a displacement 3-vector that is stationary in S'.

    Do you agree?
     
    Last edited: Jan 28, 2012
  9. Tach Banned Banned

    Messages:
    5,265
    Nope, Moller uses the convention \(dt=0\) (mark the ends of the 3 vectors simultaneously in frame S). If you mark the ends of the vectors simultaneously in frame S' (\(dt'=0\)) the solution I have shown you produces the exact transformations you have already seen. The answer is a function on the simultaneity condition. Even IF we change the condition, the answer to the problem of vector parallelism remains the SAME, you end up simply moving \(\gamma\) from the RHS to the LHS. Either way, \(\gamma\) is a non-factor in the derivation of the angle between vectors.

    Now, please could you stop the diversions and answer the question posed at post 119. That was the FIRST question, it should be addressed FIRST. If you need some time to track down the exact pages in Rindler, take your time (I have provided you with the exact derivation in my document, so you should be able to address the issue right away).
     
    Last edited: Jan 28, 2012
  10. Pete It's not rocket surgery Registered Senior Member

    Messages:
    10,167
    3.1.1 Lorentz transformation of vectors
    I think we've almost resolved this issue. Let's be sure, then we can move on to another:

    Lorentz transformation of a velocity vector
    We're both satisfied that this is the correct lorentz transformation for a velocity vector. Right?

    Lorentz transformation of a displacement vector
    We're both satisfied that a displacement vector stationary in S transforms as shown on page 2 of your document:
    A displacement vector stationary in S' transforms as described in Moller, 1952, p47:
    Do you agree?
     
  11. Tach Banned Banned

    Messages:
    5,265
    Right.


    Good.


    I already explained to you how the answer depends on the simultaneity condition. It all depends in which frame you mark the endpoints simultaneously. I prefer the condition \(dt'=0\) since it (re)produces the longitudinal length contraction. Moller's doesn't.
    More importantly, even if we used the simultaneity condition used by Moller, NOTHING changes in my solution, the conclusion is the SAME because \(\gamma\) cancels out in the condition of parallelism. Now, could you please stop the diversions and address the flaw in your derivation I flagged at post 119? Thank you.
     
  12. Pete It's not rocket surgery Registered Senior Member

    Messages:
    10,167
    3.1.1 Lorentz transformation of vectors
    I don't understand what you're objecting to.
    Do you agree that the transformation in Moller is valid or not?
    I don't see why you should disagree, since it is just the inverse of the previous equation.

    I really want to get to that issue, but you seem to imply that I'm saying something wrong about the vector transformations, and I'm reluctant to move on until we're both clear on this basic stuff.
    So am I saying something wrong? If so, what?

    Please don't be impatient.
    I really want to conduct this discussion as I proposed: not with the goal of determining a winner and a loser, but of first finding common foundations, then building on those foundations to a mutual conclusion.
     
  13. Tach Banned Banned

    Messages:
    5,265


    Post 119 tells you exactly what is wrong with your solution.

    I have been very patient, so let's work on your understanding what is wrong with your solution, let's go back to post 119 and work together (in earnest) trying to understand the issue.
     
  14. Pete It's not rocket surgery Registered Senior Member

    Messages:
    10,167
    I think we do agree regarding the Lorentz vector transformation equations.
    Moving on.
    3.1.3.1 Rindler's proof of angle invariance
    Rindler correctly proves that the angle between two displacement vectors is invariant in Euclidian space, by relying on the fact that the norm to a displacement vector is invariant under a Euclidian velocity boost.
    Tach correctly extends that proof to displacement 3-vectors in Minkowski space.

    However, Rindler's proof doesn't not apply to the angle between a displacement vector and a velocity vector.
    The norm of a velocity vector is not invariant under a velocity boost.
    In the low velocity limit, a velocity vector \(\vec{v}\) boosted by velocity \(\vec{V}\) transforms as:
    \(\begin{align}\vec{v_\parallel}' &= \vec{v_\parallel} - \vec{V} \\ \vec{v_\perp}' &= \vec{v_\perp} \end{align}\)
     
  15. Tach Banned Banned

    Messages:
    5,265
    Yes.


    Thank you for finally addressing the issue. Rindler's proof is about arbitrary three-vectors.
     
  16. Pete It's not rocket surgery Registered Senior Member

    Messages:
    10,167
    3.1.3.1 Rindler's proof of angle invariance

    Rindler's proof is clearly intended to apply to arbitrary displacement 3-vectors.
    It clearly does not apply to velocity vectors.

    Do you agree that the norm of a velocity vector is frame dependent in Euclidian space-time?
     
  17. Tach Banned Banned

    Messages:
    5,265
    Actually, Rindler, just above the proof, talks about speed, acceleration, momentum as examples of three-vectors.



    So is \(\Delta x\), nevertheless Rindler clearly uses \(\Delta x, \Delta y, \Delta z\) as a prototype of a three-vector in his proof. So, I do not see your point.
     
  18. Pete It's not rocket surgery Registered Senior Member

    Messages:
    10,167
    3.1.3.1 Rindler's proof of angle invariance
    Regardless of what Rindler says (I don't have ready access to it, so I can't confirm for myself), The proof you quoted clearly doesn't apply to velocity vectors.

    It's obvious.
    In the low velocity limit, a velocity vector \(\vec{v}\) boosted by velocity \(\vec{V}\) transforms as:
    \(\begin{align}\vec{v_\parallel}' &= \vec{v_\parallel} - \vec{V} \\ \vec{v_\perp}' &= \vec{v_\perp} \end{align}\)

    Do you agree?
    Can you see from that result that the angle between velocity vectors is not frame invariant?
    Tach, when an explicit question is asked, an explicit answer should be given.

    Do you agree that the norm of a velocity vector is frame dependent in Euclidian space-time?

    The point is that your quote of Rindler's proof explicitly relies on the norm of a vector being invariant:
    If \(\vec{a}\) is a velocity vector, then obviously \(a^2\) is not invariant, for example.
     
    Last edited: Jan 30, 2012
  19. Tach Banned Banned

    Messages:
    5,265
    We need to go back to 3.1.1 Lorentz transformation of vectors because this issue is not resolved.

    Correct. But you need to pay attention, the transformation of velocity vectors is based on the general transformation of displacement vectors, see formulas (1.1)-(1.2) here. In order to get the transformation for velocity, one needs to perform a couple of divisions, one by \(dt' \ne 0\) followed by a second one, by \(dt \ne 0\), see formula (1.3). Therefore, one cannot turn around and plug in \(dt=0\) or \(dt' =0\) into the general formula for transformation (1.1) as Moller does. While Moller formulas are correct for the particular case \(dt=0\) , you are not allowed to apply it for the problem we are discussing because the derivation of the velocity transformation already precludes EITHER \(dt=0\) OR \(dt'=0\). You need to proceed in your calculations by using the general formula (1.2) for displacement vector transformation, you cannot use the particular formula derived by setting \(dt=0\).

    Yes, the transformation I have shown you is correct. No, you cannot use its particular form derived for \(dt=0\) or for \(dt'=0\), for the reasons explained above.
     
    Last edited: Jan 30, 2012
  20. Pete It's not rocket surgery Registered Senior Member

    Messages:
    10,167
    3.1.1 Lorentz transformation of vectors
    We both need to pay careful attention to exactly what vector transformations we're describing.
    Equation (1.1) comes from Moller:
    \(\begin{align} \vec{r}' &= \vec{r} + \vec{V}(\frac{\gamma-1}{V^2}\vec{r}.\vec{V} - \gamma t) \\ t' &= \gamma(t - \vec{V}.\vec{x}/c^2) \end{align}\)
    This is the general transform of an arbitrary four-vector.

    You certainly can, if you're transforming space-like four-vectors, as Moller does.
    We already agreed on the velocity transformation.
    You don't need differentiation to derive it, since a timelike four-vector easily translates to a velocity 3-vector, but that's irrelevant - we agree on the transformation.

    Differentiation is irrelevant when transforming a spatial displacement vector.
    On page 47 of Moller, (the specific citation you gave), Moller is explicitly talking about transforming the spatial displacement vector between two points at rest in S'.

    To do so, he considers the four-vector between simultaneous events in S, one at each point. Obviously, this four vector has a t value of zero.

    Transforming that four-vector to S' and considering the spatial component produces Moller's result:
    \(\vec{r}' = \vec{r} + \vec{v}(\gamma-1)\frac{\vec{r}.\vec{v}}{v^2}\)
    Note that the t' component of the transformed four-vector is non-zero, but is of no interest because the two points in question are at rest in S'.

    So there's no problem with Moller, unless it's misapplied.

    You used the inverse of this transformation yourself in your document, so we clearly agree on how to transform the spatial displacement between points which are both at rest in some frame.

    We agree on the general transformation of a four-vector.
    We agree on the transformation of a velocity vector.
    We agree on the transformation of spatial vectors between points stationary in one frame.


    So what's the issue?
    It seems that the specific issue we're having is about how \(\hat{P_t}(t)\) should be transformed.
    You want to differentiate it and transform the resulting velocity vector.
    I want to transform it as a simple spatial vector (actually not quite, but the result turns out to be the same).
    I think a new subheading is in order:

    3.1.1.1 Lorentz transformation of vectors
     
    Last edited: Jan 31, 2012
  21. Tach Banned Banned

    Messages:
    5,265
    No, you cannot do that when you already used \(dt' \ne 0\) and \(dt \ne 0\) in the derivation of the velocity transformation. You cannot have both \(dt=0\) and \(dt \ne 0\) at the same time. On the other hand, you can definitely use the general transformation (1.2) for the displacement vectors since there is no contradiction.

    Oh yes, you do, this is how the velocity transformation was derived in first place.



    False, you cannot simply pick the form that suits you , you need to use consistent math throughout. You cannot use \(dt \ne 0\) for the derivation of velocity transformation and then suffer sudden amnesia and set \( dt =0\) in the general transform of the displacement vectors because it serves your purpose.



    I understand very well what he's doing. As an aside, a much better approach is to set \(dt'=0\) but this is beside the point, he's not mixing displacement vector transformation with velocity transformation.



    Yes, there is no problem. No, it does not apply in our debate since it leads to a mathematical contradiction.


    Yes, I did, because it reflects length contraction better but this should not be misconstrued as in a nod towards this transform in the case we are debating.


    See above. You can't mix and match as it suits your PoV, you need to use the general transform (1.2), you can't make \(dt=0\) in the general transform because you already assumed \(dt \ne 0\) in the derivation of the velocity transform.


    It is not what we want, it is about what is right. What is right is not to particularize the transform for a specific case (\(dt=0\)) . This is the crux of the disagreement between our approaches. In your approach \(\hat{P_t}(t)\) is frame-invariant, in my approach, it transforms exactly the same way as velocity, hence, thy remain parallel to each other.

    All the cases can be read from the posted document . This includes the argument for the only acceptable choice (the general form).
     
  22. Pete It's not rocket surgery Registered Senior Member

    Messages:
    10,167
    3.1.1 Lorentz transformation of vectors
    Are you talking about vector transformations in general, or about the specific case of \(\hat{P_t}\)?

    In general, transforming a spatial displacement vector obviously doesn't rely on transforming a velocity vector. Right?

    I have not been talking about \(\hat{P_t}\) or any other vector in our particular problem in this section so far. I'm talking in general about the simple transformation of a arbitrary spatial displacement vector.

    Well, Moller doesn't do anything with derivatives in that chapter, so he's not setting dt or dt' to anything.
    He is just starting from two points at rest in S', considering events at those points with the same value of t, transforming those events to S', and finding the spatial component of the vector between the transformed events.

    You can get the inverse result by starting with points at rest in S.
    Both results correctly reflect length contraction.
    The result in Moller shows that a rod at rest in S' is contracted in S. The inverse shows that a rod at rest in S' is contracted in S.
    Obviously, both are correct.

    In the next post, I'd like to move on to the sub issue of transforming \(\hat{P_t}\).
     
  23. Tach Banned Banned

    Messages:
    5,265
    Throughout all my posts I have been talking about the specific case of \(\hat{P_t}\). This is what the debate has been about all along.

    You have it backwards, the velocity transformation is a CONSEQUENCE of the transformation of the displacement vector \(dr\). This is why you are not allowed to make \(dt=0\) in order to derive the transformation of \(dr\) , then to "forget" about making it zero by now making \(dt \ne 0\) in order to derive the velocity transformation, as already explained several times.

    The debate is not about transformations of displacement vectors in general, it is about how \(\hat{P_t}\) transforms with regards to the way \(v\) transforms.

    He actually is doing differentiation followed by setting \(dt=0\) but this is totally irrelevant, we are debating another subject: how \(\hat{P_t}\) transforms with regards to the way \(v\) transforms. So, let's keep it on point.



    I have already covered this subject in great extent. See the document I posted.
     
    Last edited: Jan 31, 2012
Thread Status:
Not open for further replies.

Share This Page