Tea time

Discussion in 'General Science & Technology' started by foghorn, Apr 20, 2022.

  1. foghorn Valued Senior Member

    Messages:
    1,452
    The spec label on my small electric kettle shows wattage as 250-1000w.
    So, what does it use? Minimum is one cup.
    I know how to work out the price using wattage, but what wattage do I use?
     
  2. Google AdSense Guest Advertisement



    to hide all adverts.
  3. Sarkus Hippomonstrosesquippedalo phobe Valued Senior Member

    Messages:
    10,353
    It's likely to be 1000w, or you'll be waiting for a long time for the water to boil.

    Please Register or Log in to view the hidden image!



    Typically it takes c.0.1 kWh to boil 1 litre of water, not accounting for losses (heating the walls of the kettle etc).
    So at 250w that would take 100/250 hours = 24 minutes.
    At 1000w it would be 6 minutes.

    In terms of the maths to reach that 0.1 kWh figure...

    The definition of 1 calorie is the amount of energy required to raise 1g of water by 1C, at 1 atmosphere.
    1 litre of water is 1 kg, so each degree-C rise in temp requires 1000 calories.
    To take water from, say, 15C to 100C, would therefore require 85,000 calories.
    1 calorie is roughly 4.2 joules, so this is now 357,000 J.
    1 Watt is 1 joule/sec, so 1 Watt-hour is 3,600 Joules.
    1 kWh is therefore 3,600,000 joules.

    To boil the 1 litre of water therefore requires roughly 0.1 kWh (plus an amount for losses).

    Hope that helps.

    Please Register or Log in to view the hidden image!

     
    foghorn, Yazata and exchemist like this.
  4. Google AdSense Guest Advertisement



    to hide all adverts.
  5. Michael 345 New year. PRESENT is 72 years oldl Valued Senior Member

    Messages:
    13,077
    Years ago when they just started to become the new appliance I bought a number of coffee capsules so I could buy the matching appliance ½ price

    Only used those capsules. Now I buy the coffee I like, spoonful in the cup, press go button, 50ml hot water into coffee

    Two (or three) more presses, add milk, my coffee is ready

    Please Register or Log in to view the hidden image!

     
    foghorn likes this.
  6. Google AdSense Guest Advertisement



    to hide all adverts.
  7. foghorn Valued Senior Member

    Messages:
    1,452
    Thanks, that does help.
    Does that scale down as such:
    One cup (250ml)
    To bring one cup to boil at 1000w will take (6mins/4) = 1.5 minutes?
    To bring one cup to boil at 250w will take (24minutes/4) = 6 minutes?
    Is that too simplistic?
     
  8. DaveC426913 Valued Senior Member

    Messages:
    18,935
    It might apply to a closed system.
    It does not take into account heat loss over time.
    In practice, you want to minimize time elapsed, so that you minimize that heat loss.
     
    foghorn likes this.
  9. exchemist Valued Senior Member

    Messages:
    12,451
    More or less, though as Dave points out it won't scale exactly due to the greater heat loss over a longer time.

    What baffles me is that your kettle apparently claims it can have a variable power. Is this something you can set yourself? What is the point of that? I'd have thought the faster the better, so max power is always what the user will choose.
     
  10. DaveC426913 Valued Senior Member

    Messages:
    18,935
    Hair dryers had a similar feature. You don't always want highest wattage.

    At least one use for a lower kettle setting would be to humidify a room - such as for someone with lung problems.
     
  11. exchemist Valued Senior Member

    Messages:
    12,451
    Fairly obviously, the mode of use of a hair dryer is nothing like a kettle.

    I doubt anyone sells a kettle on the basis of its alternative use as a room dehumidifier.
     
  12. James R Just this guy, you know? Staff Member

    Messages:
    39,397
    Some kettles have a feature to "keep your coffee warm", which I think means periodically re-heating the water after the initial boil. Maybe the 250 W setting is for that kind of thing. Personally, I don't see the point; seems very wasteful of energy, exacerbates global heating etc.
     
  13. foghorn Valued Senior Member

    Messages:
    1,452

    Please Register or Log in to view the hidden image!

    No, I can't set it.

    I did think of the heat loss to other things besides the water, but wanted to know if I was roughly right.

    Now that I've seen the two wattage rates on my kettle, I have noticed it on others, especially on the higher wattage kettles. One was 2520-3000 Watts. Take a stroll around a shop looking at the bases of electric kettles.

    I have an idea what maybe going on here.
    Maybe the electric element doesn't reach 1000W heating instantly. And so with a small volume of water (250ml), the heating on the build up to 1000W raises the temperature to near boiling and boils outright when the element reaches 1000W. And so the bulk of the heating up time was not at 1000W.
    Something like that????
    Ps . That picture is not my kettle.
     
  14. Sarkus Hippomonstrosesquippedalo phobe Valued Senior Member

    Messages:
    10,353
    The picture above - is clearly for European / UK market - or anywhere else that uses 220-240V. In the UK a typical kitchen will be rated at 13A for appliances, so 13A * 230V = 2,990W max power for an appliance.
    Assuming European countries (220V) use the same 13A standard, this would be c.2,860W max power. So the 2.5 - 3kW range looks appropriate (given losses and fluctuations in current) as being the max for the European / UK markets.

    If you try to use it in the US without a suitable converter, it would try to draw c.double the current - so to achieve 3kW on 120V supply you'd need a current of 25A, which the plug/kettle/socket may not be able to withstand - hence it is not rated for that.

    My guess about the smaller kettle is that it is usable with a wider range of voltages and currents off the bat, so might well be sold around the world rather than specific to one market.
    If it is Japanese then they operate on 100V, so at 250W they'd need 2.5A, up to 10A for the 1kW. In the UK you're anywhere between 1 - 4 amps for the same.
    If it's Taiwan, then they're 110V etc.

    What does the sticker suggest?

    If it's an expensive small kettle then it may have a sensor and adjust power consumption for the level of water, so that it always boils in roughly the same time? I'm not aware that kettles do that, but you never know.

    Please Register or Log in to view the hidden image!

     
    foghorn and exchemist like this.
  15. exchemist Valued Senior Member

    Messages:
    12,451
    Agreed: the variation between 2520 and 3000 W could, just about, be due to the max and min voltages in EU countries + UK.

    But this does not account for a range of 250W-1kW as in the OP.
     
  16. foghorn Valued Senior Member

    Messages:
    1,452
    Looking around the web, I have noticed my model kettle is advertised as 1000W and not what is showing on my kettle's base label i.e 250-1000W.
     
  17. exchemist Valued Senior Member

    Messages:
    12,451
    Does this kettle have a "keep warm" feature, by any chance? Looking on the web I see that quite a number of them do. I wonder if this may use a segment of the element only, or something. Perhaps if you post a picture of it, we can try to find an on-line description of it that explains the 250W label.
     
  18. foghorn Valued Senior Member

    Messages:
    1,452
    ''Does this kettle have a "keep warm" feature'' Not for £19.

    Please Register or Log in to view the hidden image!


    Russell Hobbs site.
    https://en.russellhobbs.com/product/travel-kettle-23840-70
    I think Sarkus was on to it about Europe and all.

    Notice at the bottom of page it makes the point of '' Dual Voltage 120-240V''

    It does not mention the spec label's 250-1000W, only shows 1000W.
     
  19. exchemist Valued Senior Member

    Messages:
    12,451
    AHA! The penny has dropped. It's a sold as a "travelling" kettle. If it is used in a 120V country then, given the resistance of the element is fixed, the current it will draw will be half as much as at 240V. But the power dissipated in a resistance is i²R, so halving the current reduces the power dissipated to a quarter of its value at 240V. So 250W instead of 1000W.

    In Europe the voltage is always 220-240V, so far as I am aware, but in N America it is usually 120V. So they are covering themselves for you taking it there.
    However, as someone observed earlier in the thread, 250W is pretty hopeless for boiling water. So in practice, in a 120V country you would not want to use this kettle.
     
    Sarkus and foghorn like this.
  20. sideshowbob Sorry, wrong number. Valued Senior Member

    Messages:
    7,057
  21. foghorn Valued Senior Member

    Messages:
    1,452
    Why am I making all this fuss over a kettle?
    I'm checking my reckoning against the smart meter reading. Funny thing is the smart shows 2 pence and sometimes 3 pence a cup, even one of 1p.
    And, I have to say, I wait a minute or two to watch it update the display after a cup has boiled. That's what started me on this trip.
    I suppose the smart meter is not so punctual in updating the display, and when it does it picks a number out of the air between 1 and 3 ??? I suppose and hope a more 'accurate' usage reading is being sent to the electric company.
     
    Last edited: Apr 25, 2022
  22. foghorn Valued Senior Member

    Messages:
    1,452
  23. Sarkus Hippomonstrosesquippedalo phobe Valued Senior Member

    Messages:
    10,353
    THAT's the phrase I was looking for, but couldn't think of it!

    Please Register or Log in to view the hidden image!


    Small kettle, small amount of water. If just 1 cup then would only take a few minutes.
    And sometimes better to have a cup of tea than none at all, even if it takes quite a while!

    Please Register or Log in to view the hidden image!

     
    foghorn and exchemist like this.

Share This Page